The calorimeter is a device used to measure the change in temperature of a quantity of substance (usually water) of known specific heat. This change in temperature is due to the heat absorbed or released in the process under study; chemical if it is a reaction, or physical if it consists of a phase or state change.
In the laboratory the simplest calorimeter that can be found is that of the coffee glass. It is used to measure the heat absorbed or released in a reaction at constant pressure, in aqueous solution. The reactions are selected to avoid the intervention of reagents or gaseous products.
Amount of heat given off in the reaction = amount of heat absorbed by the calorimeter + amount of heat absorbed by the solution
The amount of heat absorbed by the calorimeter is called the calorimeter capacity of the calorimeter. This is determined by supplying a known amount of heat to the calorimeter with a given mass of water. Then, the increase in temperature of the calorimeter and of the solution containing.
With these data, and the use of the specific heat of the water (4.18 J / g.ºC), the caloric capacity of the calorimeter can be calculated. This capacity is also called the calorimeter constant.
On the other hand, the heat gained by the aqueous solution is equal to m · ce · Δt. In the formula m = mass of water, ce = specific heat of water and Δt = temperature variation. Knowing all this, you can then calculate the amount of heat released by the exothermic reaction.
Article index
In 1780, A. L. Lavoisier, a French chemist, considered one of the fathers of chemistry, used a guinea pig to measure the production of heat by its respiration.
How? Using a device similar to a calorimeter. The heat produced by the guinea pig was evidenced by the melting of the snow that surrounded the apparatus.
Researchers A. L Lavoisier (1743-1794) and P. S. Laplace (1749-1827) designed a calorimeter that was used to measure the specific heat of a body by the method of melting ice.
The calorimeter consisted of a cylindrical varnished tin cup, supported by a tripod and internally terminated with a funnel. In its interior, another glass was placed, similar to the previous one, with a tube that crossed the outer chamber and that was provided with a key. Inside the second glass was a grid.
The being or object whose specific heat was to be determined was placed on this grid. Ice was placed inside the concentric glasses, as in the basket.
The heat produced by the body was absorbed by the ice, causing it to melt. And the liquid water product of the melting of the ice was collected, opening the internal glass faucet.
And finally, the water weighed, the mass of the molten ice was known.
The most widely used calorimeter in chemistry teaching laboratories is the so-called coffee cup calorimeter. This calorimeter consists of a beaker, or instead, a container of anime material that has certain insulating properties. Inside this container the aqueous solution is placed with the body that is going to produce or absorb heat.
A lid made of insulating material with two holes is placed on the upper part of the container. In one a thermometer is inserted to measure temperature changes, and in the other a stirrer, preferably made of glass material, which fulfills the function of moving the content of the aqueous solution..
The image shows the parts of a bomb calorimeter; However, it can be seen that it has the thermometer and the stirrer, common elements in several calorimeters.
It is the one that is used in the determination of the heat released by an exothermic reaction, and the heat absorbed in an endothermic reaction..
Furthermore, it can be used in determining the specific heat of a body; that is, the amount of heat that a gram of the substance needs to absorb to raise its temperature by one degree Celsius. .
It is a device in which the amount of heat that is given off or absorbed in a reaction that occurs at constant volume is measured.
The reaction takes place in a sturdy steel container (the pump), which is immersed in a large volume of water. This keeps the water temperature changes small. Therefore, it is assumed that the changes associated with the reaction are measured at constant volume and temperature..
The above indicates that no work is done when a reaction is carried out in a bomb calorimeter.
The reaction starts by supplying electricity through cables connected to the pump.
It is characterized by having an insulating structure called a shield. The shield is located around the cell where heat and temperature changes occur. It is also connected to an electronic system that maintains its temperature very close to that of the cell, to avoid heat transfer..
In an adiabatic calorimeter the temperature difference between the calorimeter and its surroundings is minimized; as well as minimizing the heat transfer coefficient and the time for heat exchange.
Its parts consist of the following:
-The cell (or container), integrated into an insulation system through which it tries to avoid heat loss.
-The thermometer, to measure temperature changes.
-A heater, connected to a controllable source of electrical voltage.
-And the shield, already mentioned.
In this type of calorimeter, properties such as entropy, Debye temperature and state electron density can be determined..
It is a device in which the reaction cell and the pump are immersed in a structure called a jacket. In this case, the so-called jacket consists of water, kept at a constant temperature.
Cell and pump temperatures rise as heat is released during the combustion process; but the water jacket temperature is kept at a fixed temperature.
A microprocessor controls the temperature of the cell and the jacket, making the necessary corrections for the leakage heat that results from the differences between the two temperatures..
These corrections are applied continuously, and with a final correction, based on measurements before and after the test..
Developed by Caliendar, it has a device to move a gas in a container at a constant speed. By adding heat, the increase in temperature in the fluid is measured.
The flow calorimeter is characterized by:
- An accurate measurement of the speed of constant flow.
- Accurate measurement of the amount of heat introduced to the fluid through a heater.
- An accurate measurement of the temperature increase in the gas caused by energy input
- A design to measure the capacity of a gas under pressure.
It is characterized by having two containers: in one the sample to be studied is placed, while the other is kept empty or a reference material is used..
The two vessels are heated at a constant rate of energy, by means of two independent heaters. When the two vessels begin to heat up, the computer will plot the difference in heat flow from the heaters against the temperature, thus allowing the heat flow to be determined..
Furthermore, the variation of the temperature as a function of time can be determined; and finally, the caloric capacity.
-The basic calorimeters, coffee cup type, allow to measure the amount of heat that a body gives off or absorbs. In them it is possible to determine if a reaction is exothermic or endothermic. In addition, the specific heat of a body can be determined.
-With the adiabatic calorimeter it has been possible to determine the entropy of a chemical process and the electronic density of the state.
-Microcalorimeters are used to study biological systems that include interactions between molecules, as well as the molecular conformational changes that occur; for example, in the unfolding of a molecule. Line includes both differential sweep and isothermal titration.
-The microcalorimeter is used in the development of small molecule drugs, biotherapeutics and vaccines.
In the oxygen bomb calorimeter, the combustion of many substances takes place, and its caloric value can be determined. Among the substances studied using this calorimeter are: coal and coke; edible oils, both heavy and light; gasoline and all motor fuels.
As well as the types of fuels for aircraft reactors; fuel waste and waste disposal; food products and supplements for human nutrition; forage crops and supplements for animal feed; Construction materials; rocket fuels and propellants.
Likewise, the caloric power has been determined by calorimetry in thermodynamic studies of combustible materials; in the study of energy balance in ecology; in explosives and thermal powders and in teaching basic thermodynamic methods.
Yet No Comments