The hydracids or binary acids are compounds dissolved in water that are made up of hydrogen and a non-metallic element: hydrogen halides. Its general chemical formula can be expressed as HX, where H is the hydrogen atom, and X is the non-metallic element..
X can belong to group 17, the halogens, or to the elements of group 16 without including oxygen. Unlike oxo acids, hydracids lack oxygen. Since hydracids are covalent or molecular compounds, the H-X bond must be considered. This is of great importance and defines the characteristics of each hydracid..
What about the H-X bond? As can be seen in the image above, there is a permanent dipole moment product of the different electronegativities between H and X. Since X is usually more electronegative than H, it attracts its electronic cloud and ends up with a negative partial charge δ-.
On the other hand, by giving up part of its electron density to X, it ends up with a positive partial charge δ +. The more negative δ-, the richer in electrons X will be and the greater the electron deficiency of H. Therefore, depending on which element X is, a hydracid can be more or less polar.
The image also reveals the structure of the hydracids. H-X is a linear molecule, which can interact with another at one of its ends. The more polar HX is, the more strongly or affinity its molecules will interact with. As a result, its boiling or melting points will increase.
However, the H-X - H-X interactions are still weak enough to give rise to a solid hydracid. For this reason, under conditions of pressure and ambient temperature they are gaseous substances; With the exception of HF, which evaporates above 20ºC.
Why? Because HF is capable of forming strong hydrogen bonds. While the other hydracids, whose non-metallic elements are less electronegative, they can hardly be in the liquid phase below 0ºC. HCl, for example, boils at about -85ºC.
Are hydracids acidic substances? The answer lies in the positive partial charge δ + on the hydrogen atom. If δ + is very large or the H-X bond is very weak, then HX will be a strong acid; as with all the hydroacids of halogens, once their respective halides are dissolved in water.
Article index
-Visibly all hydracids are transparent solutions, since HX are very soluble in water. They can have yellowish tones according to the concentrations of dissolved HX.
-They are smokers, which means that they give off dense, corrosive and irritating fumes (some of them are even nauseating). This is because the HX molecules are very volatile and interact with the water vapor in the medium surrounding the solutions. Furthermore, HX in its anhydrous forms are gaseous compounds..
-Hydracids are good conductors of electricity. Although HX are gaseous species at atmospheric conditions, when dissolved in water they release ions (H+X-), which allow the passage of electric current.
-Its boiling points are higher than those of its anhydrous forms. That is, HX (ac), which denotes the hydracid, boils at temperatures above HX (g). For example, hydrogen chloride, HCl (g), boils at -85ºC, but hydrochloric acid, its hydracid, around 48ºC..
Why? Because the gaseous HX molecules are surrounded by those of water. Two types of interactions can occur at the same time: hydrogen bonds, HX - HtwoO - HX, or ion solvation, H3OR+(ac) and X-(ac). This fact is directly related to the chemical characteristics of hydracids..
Hydracids are very acidic solutions, so they have acidic protons H3OR+ available to react with other substances. Where does the H3OR+? Of the hydrogen atom with a partial positive charge δ +, which dissociates in water and ends up covalently joining a water molecule:
HX (aq) + HtwoO (l) <=> X-(ac) + H3OR+(ac)
Note that the equation corresponds to a reaction that establishes an equilibrium. When the formation of X-(ac) + H3OR+(ac) is thermodynamically highly favored, HX will release its acidic proton into water; and then this one, with H3OR+ as its new "carrier", it can react with another compound, even if the latter is not a strong base.
The above explains the acidic characteristics of hydracids. This is the case for all HX dissolved in water; but some generate more acidic solutions than others. For what is this? The reasons can be very complicated. Not all HX (ac) favor the anterior equilibrium towards the right, that is, towards X-(ac) + H3OR+(ac).
And the exception is observed in hydrofluoric acid, HF (aq). Fluorine is very electronegative, therefore, it shortens the distance of the H-X bond, strengthening it against its breakdown by the action of water..
Likewise, the H-F bond has much better overlap for atomic radius reasons. On the other hand, the H-Cl, H-Br or H-I bonds are weaker and tend to dissociate completely in water, to the point of breaking the equilibrium raised above..
This is because the other halogens or chalcogens (sulfur, for example), have larger atomic radii and, therefore, larger orbitals. Consequently, the H-X bond presents poorer orbital overlap as X is larger, which in turn affects the acid force when in contact with water..
In this way, the decreasing order of acidity for the hydro acids of the halogens is the following: HF< HCl How are hydracids named? In their anhydrous forms, HX (g), they must be mentioned as dictated for hydrogen halides: adding the suffix -ide to the end of their names. For example, HI (g) consists of a halide (or hydride) formed by hydrogen and iodine, therefore its name is: iodaurochs hydrogen. Since nonmetals are generally more electronegative than hydrogen, it has an oxidation number of +1. In NaH, on the other hand, hydrogen has an oxidation number of -1. This is another indirect way of differentiating molecular hydrides from halogens or hydrogen halides from other compounds.. Once HX (g) comes into contact with water, it is represented as HX (ac) and then we have the hydracid. To name the hydracid, HX (ac), the suffix -ide of its anhydrous forms must be replaced by the suffix -hydric. And they should be mentioned as acids in the first place. Thus, for the above example, the HI (ac) is named as: acid iodhydric. Hydracids can be formed by simply dissolving their corresponding hydrogen halides in water. This can be represented by the following chemical equation: HX (g) => HX (ac) HX (g) is very soluble in water, so there is no balance of solubility, unlike its ionic dissociation to release acidic protons. However, there is a synthetic method that is preferred because it uses salts or minerals as raw material, dissolving them at low temperatures with strong acids.. If table salt, NaCl, is dissolved with concentrated sulfuric acid, the following reaction occurs: NaCl (s) + HtwoSW4(aq) => HCl (aq) + NaHSO4(ac) Sulfuric acid donates one of its acidic protons to the chloride anion Cl-, thus converting it into hydrochloric acid. Hydrogen chloride, HCl (g), can escape from this mixture because it is very volatile, especially if its concentration in water is very high. The other salt produced is sodium acid sulfate, NaHSO4. Another way to produce it is to replace sulfuric acid with concentrated phosphoric acid: NaCl (s) + H3PO4(aq) => HCl (aq) + NaHtwoPO4(ac) The H3PO4 reacts in the same way as HtwoSW4, producing hydrochloric acid and sodium diacid phosphate. NaCl is the source of the anion Cl-, so that to synthesize the other hydracids, salts or minerals containing F are needed-, Br-, I-, Stwo-, etc. But, the use of HtwoSW4 or H3PO4 it will depend on its oxidative strength. The HtwoSW4 It is a very strong oxidizing agent, to the point that it oxidizes even Br- and I- to their molecular forms Brtwo and Itwo; the first is a reddish liquid, and the second a purple solid. Therefore, the H3PO4 represents the preferred alternative in such syntheses. Hydracids are essentially used to dissolve different types of matter. This is because they are strong acids, and can clean any surface in moderation.. Its acidic protons are added to the compounds of impurities or dirt, making them soluble in the aqueous medium and are then dragged by the water. Depending on the chemical nature of said surface, one hydracid or another can be used. For example, hydrofluoric acid cannot be used to clean glass as it will dissolve them on the spot. Hydrochloric acid is used to remove stains from swimming pool tiles. They are also capable of dissolving rocks or solid samples, and then used for analytical or production purposes on small or large scales. In ion exchange chromatography, dilute hydrochloric acid is used to clean the column of remaining ions.. Some reactions require highly acidic solutions to speed them up and reduce the time they take place. This is where the hydracids come in. An example of this is the use of hydroiodic acid in the synthesis of glacial acetic acid. The oil industry also needs hydracids in refinery processes. Hydracids not only provide acidic protons, but also their respective anions. These anions can react with an organic or inorganic compound to form a specific halide. In this way, they can be synthesized: fluorides, chlorides, iodides, bromides, selenides, sulfides, and other compounds more. These halides can have very diverse applications. For example, they can be used to synthesize polymers, such as Teflon; or intermediaries, from which the halogen atoms will be incorporated into the molecular structures of certain drugs. Suppose the molecule CH3CHtwoOH, ethanol, reacts with HCl to form ethyl chloride: CH3CHtwoOH + HCl => CH3CHtwoCl + HtwoOR Each of these reactions hides a mechanism and many aspects that are considered in organic syntheses.. There are not many examples available for hydracids, since the number of possible compounds is naturally limited. For this reason, some additional hydracids are listed below with their respective nomenclature (the abbreviation (ac) is ignored): Binary hydracid whose H-F molecules form strong hydrogen bonds, to the point that in water it is a weak acid. Unlike the hydracids considered until then, it is polyatomic, that is, it has more than two atoms, however, it continues to be binary as it is two elements: sulfur and hydrogen. Its angular H-S-H molecules do not form appreciable hydrogen bonds and can be detected by their characteristic rotten egg odor.. One of the best known acids in popular culture. It is even part of the composition of gastric juice, present in the stomach, and together with digestive enzymes they degrade food. Like hydroiodic acid, in the gas phase it consists of linear H-Br molecules, which dissociate into H ions+ (H3OR+) and Br- when they enter the water. Although tellurium has a certain metallic character, its hydracid gives off unpleasant and highly poisonous vapors, such as hydrogen selenium. Like the other hydracids of chalcogenides (from group 16 of the periodic table), in solution it produces the anion Tetwo-, so its valence is -2.Nomenclature
Anhydrous form
In aqueous solution
How are they formed?
Direct dissolution of hydrogen halides
Dissolution of salts of non-metals with acids
Applications
Cleaners and solvents
Acid catalysts
Reagents for the synthesis of organic and inorganic compounds
Examples
HF, hydrofluoric acid
HtwoS, hydrogen sulfide
HCl, hydrochloric acid
HBr, hydrobromic acid
HtwoTe, tellurhydric acid
References
Yet No Comments