Boron nitride (BN) structure, properties, production, uses

The boron nitride It is an inorganic solid formed by the union of a boron atom (B) with a nitrogen atom (N). Its chemical formula is BN. It is a white solid that is highly resistant to high temperatures and is a good conductor of heat. It is used for example to make laboratory crucibles.

Boron nitride (BN) is resistant to many acids, however it has a certain weakness to attack by hydrofluoric acid and by molten bases. It is a good insulator of electricity.

It is obtained in various crystalline structures, of which the most important are hexagonal and cubic. The hexagonal structure resembles graphite and is slippery, therefore it is used as a lubricant.

The cubic structure is almost as hard as diamond and is used to make cutting tools and to improve the toughness of other materials.

Boron nitride can make microscopic (extremely thin) tubes called nanotubes, which have medical applications, such as transporting within the body and releasing medicines against cancer tumors..

Article index

• 1 Structure
• 2 Nomenclature
• 3 Properties
  • 3.1 Physical state
  • 3.2 Molecular weight
  • 3.3 Melting point
  • 3.4 Density
  • 3.5 Solubility
  • 3.6 Chemical properties
  • 3.7 Other physical properties
• 4 Obtaining
• 5 Uses
  • 5.1 - Uses of BN thin films
  • 5.2 - Uses of BN nanotubes
• 6 Possible toxicity of BN materials
• 7 References

Structure

Boron nitride (BN) is a compound where boron and nitrogen atoms are covalently bonded with a triple bond.

In the solid phase, BN is formed by an equal number of boron and nitrogen atoms in the form of 6-membered rings..

BN exists in four crystalline forms: hexagonal (h-BN) similar to graphite, cubic (c-BN) similar to diamond, rhombohedral (r-BN) and wurtzite (w-BN).

The structure of h-BN is similar to that of graphite, that is, it has planes of hexagonal rings which have alternating boron and nitrogen atoms..

There is a great distance between the planes of the h-BN which suggests that they are joined only by van der Waals forces, which are very weak attractive forces and the planes can easily slide over each other.

For this reason, h-BN is unctuous to the touch..

The structure of cubic BN c-BN is similar to diamond.

Nomenclature

Boron nitride

Properties

Physical state

Greasy white solid or slippery to the touch.

Molecular weight

24.82 g / mol

Melting point

Sublimates at approximately 3000 ºC.

Density

Hex BN = 2.25 g / cm³

Cubic BN = 3.47 g / cm³

Solubility

Slightly soluble in hot alcohol.

Chemical properties

Due to the strong bond between nitrogen and boron (triple bond), boron nitride has a high resistance to chemical attack and is very stable.

It is insoluble in acids such as hydrochloric acid HCl, nitric acid HNO₃ and sulfuric acid H_twoSW₄. But it is soluble in molten bases like lithium hydroxide LiOH, potassium hydroxide KOH and sodium hydroxide NaOH.

It does not react with most metals, glasses or salts. Sometimes reacts with phosphoric acid H₃PO₄. It can resist oxidation at high temperatures. BN is stable in air but is slowly hydrolyzed by water.

BN is attacked by fluorine gas F_two and by hydrofluoric acid HF.

Other physical properties

It has high thermal conductivity, high thermal stability, and high electrical resistivity, that is, it is a good insulator of electricity. Has a high surface area.

H-BN (hexagonal BN) is an unctuous solid to the touch, similar to graphite.

On heating h-BN at elevated temperature and pressure it converts to the cubic form c-BN which is extremely hard. According to some sources it is capable of scratching the diamond.

BN-based materials have the ability to absorb inorganic contaminants (such as heavy metal ions) and organic contaminants (such as dyes and drug molecules)..

Sorption means that you interact with them and can adsorb or absorb them.

Obtaining

H-BN powder is prepared by the reaction between boron trioxide B_twoOR₃ or boric acid H₃BO₃ with NH ammonia₃ or with urea NH_two(CO) NH_two under nitrogen atmosphere N_two.

BN can also be obtained by reacting boron with ammonia at a very high temperature..

Another way to prepare it is from diborane B_twoH₆ and NH ammonia₃ using an inert gas and high temperatures (600-1080 ° C):

B_twoH₆ + 2 NH₃ → 2 BN + 6 H_two

Applications

H-BN (hexagonal boron nitride) has a variety of important applications based on its properties:

-As a solid lubricant

-As an additive for cosmetics

-In high temperature electrical insulators

-In crucibles and reaction vessels

-In molds and evaporation vessels

-For hydrogen storage

-In catalysis

-To adsorb pollutants from wastewater

Cubic boron nitride (c-BN) for its hardness almost equal to that of diamond is used:

-In cutting tools for machining hard ferrous materials, such as hard alloys of steel, cast iron and tool steels

-To improve the hardness and wear resistance of other hard materials such as certain ceramics for cutting tools.

- Uses of BN thin films

They are very useful in the technology of semiconductor devices, which are components of electronic equipment. They serve for example:

-To make flat diodes; diodes are devices that allow electricity to circulate in one direction only

-In metal-insulator-semiconductor memory diodes, such as Al-BN-SiO_two-Yes

-In integrated circuits as a voltage limiter

-To increase the hardness of certain materials

-To protect some materials from oxidation

-To increase the chemical stability and electrical insulation of many types of devices

-In thin film capacitors

- Uses of BN nanotubes

Nanotubes are structures that at the molecular level are shaped like tubes. They are tubes that are so small that they can be seen only with special microscopes.

Here are some of the characteristics of BN nanotubes:

-They have a high hydrophobicity, that is, they repel water

-They have a high resistance to oxidation and heat (they can resist oxidation up to 1000 ° C)

-They exhibit a high hydrogen storage capacity

-Absorb radiation

-They are very good insulators of electricity

-They have a high thermal conductivity

-Their excellent resistance to oxidation at high temperatures means that they can be used to increase the oxidation stability of surfaces..

-Due to their hydrophobicity, they can be used to prepare super hydrophobic surfaces, that is, they have no affinity for water and water does not penetrate them.

-BN nanotubes improve the properties of certain materials, for example, it has been used to increase the hardness and resistance to fracture of glass.

In medical applications

BN nanotubes have been tested as carriers for cancer drugs such as doxorubicin. Certain compositions with these materials increased the efficiency of chemotherapy with said drug..

In several experiences it has been shown that BN nanotubes have the potential to transport new drugs and release them properly.

The use of BN nanotubes in polymeric biomaterials has been investigated to increase their hardness, degradation speed and durability. These are materials that are used for example in orthopedic implants.

As sensors

BN nanotubes have been used to build novel devices to detect moisture, carbon dioxide, CO_two and for clinical diagnoses. These sensors have demonstrated a fast response and short recovery time..

Possible toxicity of BN materials

There is some concern about the possible toxic effects of BN nanotubes. There is no clear consensus about their cytotoxicity, as some studies indicate that they are toxic to cells, while others indicate the opposite..

This is due to its hydrophobicity or insolubility in water, as it makes it difficult to carry out studies on biological materials..

Some researchers have coated the surface of BN nanotubes with other compounds that favor their solubility in water, but this has added greater uncertainty in the experiences.

Although most studies indicate that its level of toxicity is low, it is estimated that more precise investigations should be carried out.

References

1. Xiong, J. et al. (2020). Hexagonal boron nitride adsorbent: Synthesis, performance tailoring and applications. Journal of Energy Chemistry 40 (2020) 99-111. Recovered from reader.elsevier.com.
2. Mukasyan, A.S. (2017). Boron Nitride. In Concise Encyclopedia of Self-Propagating High-Temperature Synthesis. Recovered from sciencedirect.com.
3. Kalay, S. et al. (2015). Synthesis of boron nitride nanotubes and their applications. Beilstein J. Nanotechnol. 2015, 6, 84-102. Recovered from ncbi.nlm.nih.gov.
4. Arya, S.P.S. (1988). Preparation, Properties and Applications of Boron Nitride Thin Films. Thin Solid Films, 157 (1988) 267-282. Recovered from sciencedirect.com.
5. Zhang, J. et al. (2014). Cubic boron nitride-containing ceramic matrix composites for cutting tools. In Advances in Ceramic Matrix Composites. Recovered from sciencedirect.com.
6. Cotton, F. Albert and Wilkinson, Geoffrey. (1980). Advanced Inorganic Chemistry. Fourth Edition. John Wiley & Sons.
7. Sudarsan, V. (2017). Materials for Hostile Chemical Environments. In Materials Under Extreme Conditions. Recovered from sciencedirect.com
8. Dean, J.A. (editor) (1973). Lange's Handbook of Chemistry. McGraw-Hill Company.
9. Mahan, B.H. (1968). University Chemistry. Inter-American Educational Fund, S.A.